Low Pressure Dosing - 120 VAC

Part #: SP-LPD1-120VAC

Septic Panel Overview:

The LPD1-120V is Low Pressure Dosing control panel. This panel is intended to control a pump up / pump down operation for a simplex lift station. The two float set up is on-demand for the pump operation. One float is for the High Water Alarm and the other is for the Pump On/Off. The amperage from the pump will flow to the On/Off pump.

This control panel will operate a 120 VAC single phase 1/2 HP pump or smaller. There are two UL1077 circuit breakers in this control. One for the pump which uses a 20 Amp single pole, and the other is for the Alarm, which uses a 10 Amp single pole breaker. The alarm circuit is to be used with a float switch. When the float switch closes, the red beacon alarm light will come on and the audible buzzer will sound. There are two toggle switches mounted on the panel door. One momentary switch is for Alarm Test and the second is for On/ Silence. This control can be used to pump fluid from a holding tank to a treatment unit or for pumping effluent.

This panel utilizes a Weatherproof Nema 4X Polycarbonate enclosure with sun ratings that will prevent it from yellowing over time. Internal components are securely mounted via din rail and field wiring to terminals are labeled.